Products

Vape This

Free Shipping Priority Mail (USPS)on Orders $75.00 and over

Also, we deliver within a 10 mile radius of either location (minimum order of $20 required for delivery).

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
Legend Kit

$90.00

CHOOSE OPTION
image

Product Features:

  • 5 to 200W Output
    • GeekVape Chip
      • Seven Total Output Modes
    • 0.05 to 3.0 ohm Atomizer Resistance Range
  • Temperature Control Suite
    • Ni200 Nickel Support
    • Titanium Support
    • SS316 Support
    • Kanthal Support
    • POWER Support
    • TCR Mod
    • VPC Support
  • Durable through terrain
    • Military Standard 810G-516.6 Shockproof System
    • IP67 Water Proof and Dustproof System
  • 0.91 Inch Color Display
    • Amp Range
    • Output Power
    • Atomizer Resistance
    • Battery Life Indicator
    • Puff Counter
    • Neatly Displayed
    • Brightness Adjustment
      • Increase Brightness
        • Fire Button + Up Button
      • Decrease Brightness
        • Fire Button + Down Button
    • Menu Color Change
    • The front panel of the 0.91" OLED is designed for impact resistance and susceptible to water leaking inside of it. However it does not affect the internal chipset and the device is unaffected; The water will gradually evaporate in due time.
  • Carbon Steel Push to Open Bottom Latch Battery Access Door
    • Dual High Amperage 18650
      • Sold Seperately
  • Zinc, Leather, Silicone, and Aluminum Materials
  • Rubber Plugged Micro USB Port
    • 1A Charging and Updating
  • Spring Loaded Gold Plated 510 Connection
    • Powder Coated Stainless Steel
  • Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating


Product Dimensions:

  • 30.6mm by 58.5mm by 90.5mm


Aero Sub-Ohm Product Features:

  • 25mm Diameter
  • Quarter Turn Top Fill System
    • 4ml Maximum Capacity
  • IM Coil Family
    • IM1
      • 0.4 ohm
      • Ka1
      • Vertical Coil
      • 40 to 60W
    • IM4
      • 0.15 ohm
      • Ni80
      • Vertical Coil
      • 60 to 80W
    • Mesh X1
      • 0.2 ohm
      • KA1
      • Vertical Coil
      • 30 to 90W
      • 60 to 80W Recommended
  • Dual Adjustable Bottom Airflow System
    • 9mm by 2mm Each Airslot
    • Fully Closeable
  • 8mm Tapered 810 Wide Bore Drip Tip


Product Includes:

  • One Aegis Legend Kit
  • One 0.2 ohm Mesh X1 Coil
    • Pre-Installed
  • One 0.15 ohm Coil Head
  • One USB Port
  • One Spare Glass Tank Section
  • One Spare Parts Bag
  • One User Manual

Advanced User Item. Use At Your Own Risk!

hidden field
Innokin Proton 235W TC Starter Kit

$75.00

image

Innokin introduces the Proton 235W TC Starter Kit, featuring an upgraded 235W chipset with a full temperature control suite, a large side firing panel, and a unique joystick selector. The Proton is capable of 6 to 235W of output, with a 0.05 to 3.5 Ohm atomizer resistance. The Proton features a 1.45" full color screen allows you to choose from six different colors to personalize your device; blue, red, green, pink, purple, and white. Located under the colored TFT screen is an ergonomic joystick control. Wattage output of the device can be controlled with a simple up and down motion on the joystick and locking the device is as simple as three clicks. Additional control combos can be viewed on the quick reference booklet provided with the device. Dual high amperage 18650 batteries (sold separately) are housed in a slide-to-open battery access door located at the bottom of the device, along with a micro-USB port also allows you to charge the dual batteries for up to 2 amps. This kit features the Scion II Sub-Ohm Tank with Innokin's new Plexus Coil Technology, 0.15 mesh coil for use from 60 to 100W that provide with greater longevity, flavor, and stronger throat hit. This Sub-Ohm Tank comes pre-installed with 0.36 Ohm quad vertical coils for use from 80 to 150W that have excellent flavor, warmth, and vapor production. Both coils have four wicking ports that allow for quick wicking that prevents dry hits during extensive use. The Scion 2 Sub-Ohm has an 810 bore drip tip to allow for greater air flow and a convenient easy push-top fill slot for easy refilling on-the-go. The new Proton starter kit is for the using looking for the durability and flavor of mesh coils, along with all the features that compete with today's best mods. 

Proton 235W TC Box Mod Features:

  • 6 to 235W Wattage Output
    • 0.05 to 3.5 ohm Atomizer Resistance Range
  • Temperature Control Suite
    • Ni200 Nickel Support
    • Titanium Support
    • Stainless Steel Support
    • Curve Support
    • TCR Support
    • Bypass Support
    • 300 to 600 Degrees Fahrenheit Output Range
  • 1.45" TFT Screen Display
    • Output Wattage or Temperature
    • Output Timer
    • Output Voltage
    • Mode and Heating Element
    • Individual Battery Life Indicator
    • Atomizer Resistance
    • Lock Indicator
    • Puff Counter
  • Six Menu RGB Customization
    • Blue
    • Red
    • Green
    • Pink
    • Purple
    • White
  • Dual Control Interface
    • Oversized Grip Style Fire Button
    • Analog Control Adjustment Interface
  • Slide to Open Bottom Latch Battery Access Door
    • Accepts Two High Amperage 18650 Batteries
      • Sold Separately
    • Micro USB Charging
      • 5V/2A
  • Stainless Steel 510 Threading
  • 24K Gold Plated Spring Loaded 510 Connection


Proton Box Mod Product Dimensions:

  • 85mm by 44.6mm by 29.6mm


Scion 2 Sub-Ohm Tank Product Features:

  • 24mm Diameter
    • 25mm Widest Diameter
  • Slip Top Fill System
    • 3.5ml Capacity
    • Threaded Drip Tip
  • Scion Coil System
    • 0.15 ohm
      • 60 to 100W
      • Single Kanthal Mesh Coil
      • Quad Wicking Ports
    • 0.36 ohm
      • 80 to 150W
      • Quad Vertical Coil
      • Quad Wicking Ports
    • Organic Cotton
  • Dual Adjustable Airflow
    • 9mm by 2mm Each
    • Fully Closable
  • 10mm Bore 810 Delrin Drip Tip
  • Stainless Steel and Glass Construction


Product Includes:

  • One Innokin Proton 235W TC Mod
  • One Innokin Scion II Tank
  • One Plexus Coil 0.36 Ohm
    • Pre-Installed
  • One Plexus Coil 0.15 Ohm
  • One Spare 5ml Glass Tube
  • One Extra Drip Tip
  • Extra O-Rings Bag
  • One USB Charging Cable
  • One Innokin Glass Band
  • User Guide
hidden field
SMOK XPriv Kit W/ Prince Tank

$85.00

CHOOSE OPTION
image

Colors Vary Per Shipment And Change Often. Please Call For Availability.

The new X-Priv 225W TC and TFV12 Prince Full Kit is a new line up from SMOK that features a HD screen with detailed vaping data and features the TFV12 Prince Sub-Ohm Tank. The X-Priv has been designed to integrate all of SMOK's newest and most cutting edge features, design, and output technology into a compact and visually striking chassis. The chassis of the X-Priv features a familiar design that we are all comfortable with but an upgraded 2 inch screen that details essential data for users. Powered by SMOK's newest chipset, the X-Priv is capable of 1 to 225W of output, a trio of output setting adjustments, and comprehensive temperature control suite that packs in adjustable TCR as well as Preheat capability. This suite of features makes the X-Priv a capable and versatile platform. User control for adjustment is implemented through a three button interface, a richer and more intuitive menu design is implemented for a more efficient use and easier adjustment control with a full array of essential data. Included with each kit is the new SMOK TFV12 Prince Sub-Ohm Tank which combines the best elements of two of the most popular and critically acclaimed tanks today, packing in the manageable size and affordable performance coil family with the capacity and range of the full sized TFV12. Own the night with SMOK's incredible line-up, the X-Priv 225W TC and TFV12 Prince combine to create the showcase set-up of the year.


SMOK is a brand that has a reputation for immense power. The SMOK X Priv 225W mod is a cloud-churning beast that somehow manages to retain a very small profile. Even better, this SMOK X Priv 225W TC and TFV12 Prince Full Kit supplies you with the best tank in SMOK's arsenal. The advanced airflow of the TFV12 creates the ultimate mix of flavor and vapor clouds. It allows for a greater range of customization.


Serious vapers today want loads of vaping data at their fingertips. A SMOK X Priv 225W TC Kit with a TFV12 Prince lets you dial up a multitude of settings. You might be thinking that all the options on this mod would be a bit overwhelming for a newcomer, but that's not the case. SMOK prides itself on simplicity, and the learning curve for the SMOK X Priv 225W TC Starter Kit is pretty short. A few sessions with this beast, and you'll be vaping like a cloud chasing pro.
Choose from one of nine distinctive finishes that match your personality and make a bold statement. Your vaping friends will want to know how to get their own SMOK, so be sure to send them to VaporDNA.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

Purchase TFV12 Prince Replacement Coils 
Here!

SMOK X-Priv TC Features:

  • 1 to 225W Power Output
    • 0.5V to 9V
    • 0.1 to 2.5 ohm Atomizer Resistance Range
    • Three Setting Output Mode
      • Hard
      • Normal
      • Soft
    • Firmware Upgradeable
  • Temperature Control Output
    • Ni200 Nickel Support
    • Titanium Support
    • Stainless Steel Support
    • Adjustable Initial Resistance
    • Adjustable TCR
    • Preheat Capability
    • 200 to 600 degree Fahrenheit Output Range
    • 0.05 to 2.0 ohm Atomizer Resistance Range
  • 2" Colorful HD Screen
    • Vibrant Display Resolution
    • Icon Based Display Matrix
      • Highly Visible
      • Comprehensive Menu Settings and Adjustment
      • Full Display
      • Dual Battery Life Indicator
      • Menu Color Customizable
        • Blue
        • Purple
        • Orange
        • Red
        • White
        • Green
  • Innovative and Ergonomic Firing Mechanism
    • Comfortable and Easy to Use
    • Squeeze to Fire Operation
  • Back Panel Battery Bay Door
    • High Amperage 18650 Battery Powered
      • Sold Separately
    • Zinc Alloy and Carbon Fiber Paneling
    • Spring Loaded Internal Contacts
  • Zinc Alloy Chassis
  • Stainless Steel 510 Threading
    • Gold Plated 510 Contact


SMOK X-Priv Dimensions:

  • 46.5mm by 30.4mm by 88mm


TFV12 Prince Product Features:

  • 25mm Diameter Base
    • 28mm at Widest Point
  • Hinge and Lock Top Fill System
    • Swivels Open and Shut
    • Fill Port
  • 5ml Max Standard Capacity
  • 8ml Max Convex Glass Extension Capacity
  • SMOK V12 Prince Coil Family
    • V12 Prince-T10 Decuple Coil Head
      • 0.12 ohm
      • Patented Decuple Coil
      • 60 to 120W Range
      • 80 to 110W Recommended Range
    • V12 Prince-Q4 Quadruple Coil Head
      • 0.4 ohm
      • Patented Quadruple Coil
      • 40 to 100W
      • 60 to 80W Recommended Range
    • Compatible with Additional V12 Prince Coils
  • Dual Adjustable Airslots
  • Stainless Steel and Glass Construction


TFV12 Prince Product Dimensions:

  • 28mm by 63mm


Product Includes:

  • One SMOK X-Priv 225W TC Box Mod
  • One SMOK TFV12 Prince Sub-Ohm Tank
    • One V12 Prince Q4 Coil Head
    • One V12 Prince T10 Coil Head
  • USB Charging Cable
  • Replacement Parts and Glass
  • User Manual
hidden field
SMOK Prince Stick

$47.00

CHOOSE OPTION
image

Colors Vary Wildly In This Device So Please Call The Store For Color Options.

The SMOK Stick Prince is a powerful vape kit combination featuring a 3000mAh battery base and the new TFV12 Prince tank. The Stick Prince features smok's newly developed hexagon shaped power/fire button along with an intelligent battery LED indicator light so you are always informed of the status of your Smok Stick Prince.

Paired with the new Stick Prince Kit is the Smok Prince TFV12 Tank featuring 8mls of juice capacity, dual bottom airflow, food-grade glass materiel and a  "Press-To-Open" rotary hinged Top Fill system featuring a newchild safe locking system which reduces the chances of leaking. The TFV12 Prince Tank utilzes the new Prince Coil Family with its massive flavor and cloud possibilities. SMOK V12 Prince Coil Family includes: The V12 Prince-T10 Decuple Coil Head with a resistance of 0.12 ohm and a power range of 60-120W; V12 Prince-X6 Sextuple Coil Head with a resistance of 0.15ohm and a power range of 50-120W; the V12 Prince-Q4 Quadruple Coil Head with a resistance range of 0.4 ohm and a power range of 40-100W: and V12 Prince -M4 Quadruple Coil Head with a resistance of 0.17ohm and a power range of 30 - 70W. Applicable for Mechanical Mods. 

The TFV12 Prince Tank uses a new Cobra wide bore drip tip made with dyed resin materials and a striking snake scaled pattern. The Smok Stick Prince Kit is the vape platform that was born to be legend, perfect for beginners getting into vaping or veterans looking for a powerful all day vape device. 

Specifications and Features-

Stick Prince :

  • Size: 24.5mm x 85mm
  • Weight: 88.5g
  • Battery Capacity 3000mAh
  • Standby current: <>
  • Voltage Range 3.4V - 4.2V
  • Intelligent LED Battery Indicator Light
  • Hexagon power/fire button
    • Easy to use UI - One Button
  • Low voltage protection
  • 8 second cut off timer
  • Short circuit protection

TFV12 Prince Tank:

Standard Edition Comes With:
1 x Stick Prince Battery
1 x TFV12 Prince Tank
1 x V12 Prince-M4 0.17ohm Quadruple Coils(Pre-installed)
1 x V12 Prince-M4 0.17ohm Quadruple Coils
1 Spare Glass Tube
1 x USB Cable
1 x User Manual
Spare Parts

hidden field
Aspire Puxos Kit

$75.00

image

Colors Are Subject To Change. Please Call For Color Options.

The Aspire Puxos Kit features an incredibly lightweight and compact mod with distinct designs and colors. The Aspire Puxos Mod features a 18650, 20700, and 21700 compatible 100 watt capable mod with removable magnetic front and back panels. The Puxos features customizable power settings to help adjust the preheat function to your personal preferences. A high capacity Aspire INR 21700 4000mAh battery is included in this kit along with the new Cleito Pro sub-ohm tank. The Aspire Cleito Pro builds upon the Cleito series for even more incredible flavor and vapor production. The Cleito Pro features a 3.0ml e-liquid capacity with a hidden top fill design. The Cleito Pro features triple adjustable airflow slots for large amounts of vapor. This kit includes (2) Cleito Pro 0.5ohm atomizer heads designed for 60 to 80 watts.


Features and Specs for Aspire Puxos Mod:

  • Dimensions: 3-5/16" x 1-5/8" x 1-1/16" (Without Tank)
  • Spring Loaded 510 Contact Pin
  • Wattage Range: 1.0W - 100.0W (20700/21700)
  • Wattage Range: 1.0W - 80.0W (18650)
  • Temperature Control: Nickel 200, Titanium, Stainless Steel 316 and TCR
  • Temperature Control Range: 200 - 600F / 100 - 315C
  • Resistance Range: 0.1ohm - 3.5ohm
  • Customizable Power Settings for Preheat Function (CPS)
  • 0.96" OLED Display Screen
  • Magnetic Front and Back Panels
  • Lightweight Design
  • Requires (1) High Amp 18650, 20700, or 21700 Battery (Sold Separately)
  • Includes (1) Aspire INR 21700 4000mAh Battery
  • Includes 18650 Adapter Sleeve (Pre-installed)
  • Micro USB Charging Port
  • Automatic Cut Off
  • Short Circuit Protection

Please note: Temperature control requires the use of nickel, titanium or stainless coils.

Features and Specs for Aspire Cleito Pro Tank:

  • Dimensions: 2" x 15/16" (Including Drip Tip and Threads)
  • Diameter: 24mm
  • 510 Threaded
  • 3.0ml e-Liquid Capacity
  • Top Fill Design with Hidden Fill Slot
  • Glass Tank
  • Triple Airflow Slots
  • Bottom Adjustable Airflow Control Valve
  • Wide Bore Delrin Drip Tip
  • Utilizes Aspire Cleito Pro Atomizer Heads for Variable Wattage
  • Includes (2) Cleito Pro 0.5ohm Atomizer Head (Pre-installed) (Designed for 60 - 80 Watts)
hidden field

To reach either location call: (918) 505-3600

Vape This - Broken Arrow

1139 East Kenosha Street,

Broken Arrow, OK 74012

Vape This - Tulsa

4311 S Sheridan Rd,

Tulsa, OK 74137


Credit Card Merchant Services